Big thanks to all our customers.

I just wanted to take a minute to post a thanks to all our customers who have been so patient with us since last September when Hurricane Irma struck. We have a big base throughout South Florida and a good portion of those customers are in the Florida Keys.

Even though it has been six months, we are still working overtime trying to get gate equipment repaired,  replaced and re-installed. We hope to restart our preventative maintenance program again very soon. It is the one thing that we have stopped completely for the duration so we can concentrate on getting customers up and running.

Again, a very big THANK YOU to all of you.

Cheers

Coconut Grove
Upper Matecumbe
Lower Matecumbe
Marathon
Somewhere in the Keys

What we do that is different.

It’s difficult to answer someone when they ask about what we do that is different. They also say a picture is worth a thousands words. This a DoorKing 9100 on an elevated concrete slab in a residential community in Coconut Grove. This install just went through hurricane Irma.

The reason we will not repair hurricane water damaged equipment.

Click on the pic above for a link to the web site.

We have to back up the services/repairs we perform. This includes equipment we have installed and equipment we have taken over to service. Water damage, especially salt water damage may not incapacitate a device immediately. What’s worse  is water damage can not only prevent the equipment from operating in the future, it can become a serious safety concern. That’s why will will not be performing repairs on equipment that has obviously been exposed to water. If your equipment has been submerged, even for just a few minutes during hurricane Irma we will be more than happy to give an estimate to replace.

All affected wiring should be checked by a licensed electrical professional before re-energizing.

Thank you.

Not all storm/water damage is this obvious. Irma 2017

Crazy Colors

Kampong in the Grove
The Kampong in the Grove

This is a ten year old Door King 9100 gate operator. Our customer, The Kampong in the Grove, the location of the former winter home of Dr. David Fairchild, needed an updated but budget priced gate operator. We had just the thing. This location is a great place for a former high traffic gate operator to retire. The 9100 can pull and push the heavy steel gate with no problem. We installed a new main shaft,  new bearings, new belt and a surge suppressor. This operator will last a long time. One of the things we wanted to do was give it a new finish. So before overhauling we stripped it down and had it powder coated this cool red color to match the iron work at the Kampong. It’s almost iridescent. 

 

Thanks for stopping by!

Light weight Redux

Gates are built with different weights. That is, some gate fabricators build gates extremely heavy for security and durability. Some gates, due to aesthetics, budget constraints or other reasons like the fabricators suck, are built extremely light in weight. In these instances it is possible to over operate the gates with the wrong equipment. It doesn’t help that the installers do a bad job installing the equipment either.

These gates are of the light weight kind. As you can see the things are all bent out of plumb. Some semblance of thought was taken into mimicking the railings on the second story; colorwise and designwise.

Baum Before Outside

This is the inside view showing the Powermaster swing gate operators.

Baum Before Inside

Notice Kraken grappling with the side of the operator. These are trip hazards, gardeners nightmares etc. , not to mention just a plain mess. Limit adjustment is a pain in the neck and over traveling of the arms was a constant problem.

We decided to install light weight Liftmaster LA 400’s. These are the last of the old style LA 400’s as the new ones have an advanced circuit board and are black.

Baum After Inside

Baum gate mount

Baum Post Mounting bracket

We fabricated new custom mounting hardware, powder coated to match existing gate as close as possible and redesigned the gate to accept the new hardware. We got rid of all extraneous flex conduits in order to clean up the appearance and added a reversing beam to the system. Before, even though the system is push to open push the close without auto function, there were no reversing devises other than those built into the gate operator.

Baum  After Outside

We plumbed the gates and everything lined up almost perfectly.

 

Thanks for stopping by.